跳到主要內容區塊

簡傳(李澤民)

合聘教師

姓名

職稱

學歷

專長

備註

李澤民

教授

國立成功大學    材料工程博士

生醫材料

表面處理

人工植體

醫療器材

 

 

姓名

李澤民

職稱

教授

辦公室

國家衛生研究院3

聯絡

06-2353535 ext.5972/5361

傳真

06-2095845

E-Mail

tmlee@mail.ncku.edu.tw

實驗室

生醫材料實驗室

學歷

國立成功大學  材料工程博士 

國立成功大學  材料工程碩士

國立成功大學  料工程學士

經歷

高雄醫學大學口腔醫學院院長

高雄醫學大學牙醫學系教授

國家實驗研究院 國家實驗動物中心 諮議委員

國立成功大學 前瞻醫療器材科技中心副主任 

國立成功大學 醫學院總務副院長

國立成功大學 生物醫學工程學系 合聘教授

國立成功大學 口腔醫學研究所 教授

國立成功大學 醫學工程研究所 合聘副教授

國立成功大學 口腔醫學研究所 副教授

國立成功大學 口腔醫學研究所 助理教授

輔英科技大學 應用化學系 助理教授

研究
專長

生醫材料

表面處理

人工植體

醫療器材

近五年榮譽與獲獎 (2009-2013)

►個人榮譽:

1. 成杏醫學文教基金會優秀論文獎(2014)

2.  Journal of Medical and Biological Engineering優秀論文獎 (2014)

3. 成杏醫學文教基金會優秀論文獎(2013)

4. 日內瓦國際發明展銀牌(2013)

5. 成大醫學系101學年優良教師(2013)

6. 成杏醫學文教基金會優秀論文獎(2012)

7. 日內瓦國際發明展金牌(2012)

8. 成大醫學院 100 學年度教學創新與教學成果:個人創新獎(2012)

9.成功大學/醫學院 教學創新個人獎(2011)

10. 學文教基金會優秀論文獎(2010)

11. Journal of Medical and Biological Engineering優秀論文獎 (2010)

12. 成大醫學院 98 學年度教學創新與教學成果:個人成果獎(2010)

13. 口腔醫學研究所98 學年優良教師(2010)

14. 成杏醫學文教基金會優秀論文獎(2009)

15. 吳大猷先生紀念獎 (2008)

 

►學生榮譽:

1. 2014 TEDxTaipei 講員

2. 2014 經濟部工業局輕金屬創新應用競賽 第一名

3. 2014陳坤智教授獎學金

4. 2014 成大醫工系大學部專題競賽 第二名

5. 2013成大醫學院101學年碩士班學生論文競賽 優勝

6. 2013 旗勝盃創意競賽 佳作

7. 2013 經濟部工業局輕金屬創新應用競賽 第二名

8. 2013 生醫材料暨藥物釋放學會學術會議口頭論文競賽 優勝

9. 2012 醫學工程學會學術會議 口頭論文競賽 優勝

10. 2012 醫學工程學會學術會議 海報論文競賽 優勝

11. 2012 100學年成大醫學院100學年碩士班學生論文競賽 優勝

12. 2011 中華民國齒顎矯正學會 研究生口頭論文競賽 第一名 (代表台灣參加出國競賽)

13. 2011 醫學工程學會學術會議 口頭論文競賽 優勝

14. 2011 醫學工程學會學術會議 海報論文競賽 優勝

15. 2010成大醫學院99學年碩士班學生論文競賽 優勝

16. 2010 International Symposium on Surface and Interface of Biomaterials (ISSIB-II)  國際會議 學生論文競賽 口頭報告組 第三名

17.2010成大醫學院98學年碩士班學生論文競賽 優勝

近五年著作與專利 (2009-2013)

►期刊論文(*corresponding)

1  K. C. Kung, J. L. Chen, Y. T. Liu, T. M. Lee*, “Fabrication and characterization of CaP-coated nanotube arrays”, accepted by Materials Chemistry and Physics. [SCI]

2  C. S. Chien, T. Y. Huang, T. Y. Liao, T. Y. Kuo, T. M. Lee, “Design and Development of a Solar Power-Assisted Manual/Electric Wheelchair”, accepted by Journal of Rehabilitation Research & Development. [SCI]

3  C. S. Chien, Y. S. Ko, T. Y. Kuo, T. Y Liao, H. C. Lin, T. M. Lee, T. F. Hong, “Surface properties and in vitro bioactivity of fluorapatite/TiO2 coatings deposited on Ti substrates by Nd:YAG laser cladding”, accepted by Journal of Medical and Biological Engineering.

4  Y. T. Liu, K. C. Kung, C. Y. Yang, T. M. Lee*, T. S. Lui, “Engineering three-dimensional structures using bio-inspired dopamine and strontium on titanium for biomedical application”, Journal of Materials Chemistry B. 45, 7927-7935 (2014).

5  J. K. Liu, I H. Liu, C. Liu, C. J. Chang, K. C. Kung, Y. T. Liu, T. M. Lee*, J. L. Jou, “Effect of titanium nitride/titanium coatings on the stress corrosion of nickel-titanium orthodontic archwires in artificial salvia”, Applied Surface Science. 317, 974–981 (2014). [SCI]

6  C. S. Chien, Y. S. Ke, T. Y. Kuo, T. Y. Liao, T. M. Lee, T. F. Hong, “Effect of TiO2 addition on surface microstructure and bioactivity of fluorapatite coatings deposited using Nd:YAG laser”, Journal of Engineering in Medicine. 228, 379-387 (2014). [SCI]

7  K. Yuan, Y. J. Chan, K. C. Kung, T. M. Lee*, Comparison of Osseointegration on Various Implant Surfaces after Bacterial Contamination and Cleaning: A Rabbit Study, The International Journal of Oral & Maxillofacial Implants. 29, 32-40 (2014) [SCI]

8  C. S. Chien, T. Y. Liao, T. F. Hong, T. Y. Kuo, C. H. Chang, M. L. Yeh, T. M. Lee, “Surface microstructure and bioactivity of hydroxyapatite and fluorapatite coatings deposited on Ti-6Al-4V substrates using Nd-YAG laser”, Journal of Medical and Biological Engineering. 34, 109-115 (2014) [SCI]

9  C. J. Chang, T. M. Lee, J. K. Liu, “The effect of bracket bevel design and oral environmental factors on frictional resistance”, The Angle Orthodontist. 83, 956-65 (2013) [SCI]

10 Y.T. Liu, K. C. Kung, T. M. Lee*, T. S. Lui, “Enhancing Biological Properties of Porous Coatings through the Incorporation of Manganese”, Journal of Alloys and Compounds. 581, 459-467 (2013) [SCI]

11 Y. T. Liu, T. M. Lee*, T. S. Lui, “Enhanced Osteoblastic Cell Response on Zirconia by Bio-Inspired Surface Modification”, Colloids and Surfaces B: Biointerfaces.106, 37-45 (2013) [SCI]

12 Y.T. Liu, K. C. Kung, T. M. Lee*, T. S. Lui, ”Characteristics and bioactivity of CaP porous coating with bio-inspired dopamine”, Key Engineering Materials, 529-530, 233-236 (2013).[EI]

13 K. C. Kung, K. Yuan, T. M. Lee*, T. S. Lui, “Effect of heat treatment on microstructures and mechanical behavior of porous Sr-Ca-P coatings on titanium”, Journal of Alloys and Compounds. 515, 68-73 (2012) [SCI] [IF= 2.726]

14 S. P. Yang, C. Y. Yang, T. M. Lee*, T. S. Lui, “Effects of calcium-phosphate topography on osteoblast mechanobiology determined using a cytodetacher” Materials Science & Engineering C. 32, 254-262 (2012) [SCI]

15 K. C. Kung, T. M. Lee*, T. S. Lui, Influence of strontium on in vitro bioactivity of heat-treated porous Ca-P ceramics on titanium for biomedical applications, Key Engineering Materials, 493-494, 453-457 (2012). [EI]

16 J. K. Liu, T. M. Lee*, I. H. Liu, “Effect of loading force on the dissolution behavior and surface properties of nickel-titanium orthodontic archwires in artificial salvia, American Journal of Orthodontics & Dentofacial Orthopedics , 140, 166-176 (2011).

17 H. B. Chen, H. M. Hsu, J. K. Liu, T. M. Lee, “Bond Strengths of Fluoride-releasing Orthodontic Resins Using Plasma ARC and Halogen Lights”, Journal of the Taiwan Association of Orthodontists, 23, 14-20 (2011).

18 C. S. Chien, Y. S. Ko, T. Y. Kuo, T. Y. Liao, T. F. Hong, T. M .Lee, “In vitro bioactivity test of FA added with TiO2 of different phases coated on Ti-6Al-4V substrates by Nd-YAG laser cladding process”, Advanced Materials Research, 287-290, 2225-2229 (2011). [EI]

19 C. C. Wang, M. C. Hsieh, and T. M. Lee*, Effects of Nano-metric Roughness on Surface Properties and Fibroblast’s Initial Cyto-compatibilities of Ti-6Al-4V, Biointerphase, 6, 87-97 (2011). [SCI]

20 C. C. Wang, M. C. Hsieh, S. P. Yang, P. K. Chuang, J. C. Lin, and T. M. Lee*, Characteristics and cyto-compatibility of collagen/Ca-P coatings on Ti6Al4V substrate, Surface and Coatings Technology. 205, 4683-4689 (2011) [SCI]

21 S. P. Yang and T. M. Lee*, “The effect of substrate topography on hFOB cell behavior and initial cell adhesion evaluated by a cytodetacher”, J. Mat. Med.: Mat. in Med. 22, 1027-1036 (2011) [SCI]

22 C. S. Chien, T. Y. Liao, T. F. Hong, T. Y. Kuo, J. L. Wu, T. M. Lee, “Investigation into microstructural properties of fluorapatite Nd-YAG laser clad coating with PVA and WG binders”, Surface and Coatings Technology. 205, 3141-3146 (2011) [SCI]

23 K. C. Kung, T. M. Lee*, J. L. Chen, T. S. Lui, Characteristics and biological responses of novel coatings containing strontium by micro-arc oxidation, Surface and Coatings Technology. 205, 1714-1722 (2010) [SCI].

24 K, Yuan, T. M. Lee, J. S. Huang, “Temporomandibular joint (TMJ) Reconstruction: from alloplastic prosthesis to bioengineering tissue”, Journal of Medical and Biological Engineering. 30, 65-72 (2010) [SCI].

25 K. C. Kung, T. M. Lee*, T. S. Lui,, “Bioactivity and corrosion properties of novel coatings containing strontium by micro-arc oxidation”, Journal of Alloys and Compounds. 508, 384-390 (2010) [SCI].

26 C. Y. Yang, T. M. Lee*, Y. Z. Lui, C. W. Yang, T. S. Lui, A. Kuo, B. W. Huang, The influence of plasma-sprayed parameters on the characteristics of fluorapatite coatings, Journal of Medical and Biological Engineering. 30, 91-98 (2010) [SCI].

27 Y. C. Wu, T. M. Lee, J. C. Lin, S. Y. Shaw, and C. Y. Yang, "Argon-plasma-treated chitosan: surface characterization and initial osteoblast attachment". J. Biomat. Sci: Polym. E. 21, 563–579 (2010). [SCI]

28 J. T. Lo, B. H. Chen, T. M. Lee, J. Han, S. S. Feng, J. L. Li, “Encapsulation of Paclitaxel by Self-Emulsifying O/W Formulations Prepared from Mixed Nonionic Surfactants”, Journal of Pharmaceutical Sciences, 99:2320–2332 (2010) [SCI].

29 C. Y. Yang, C. W. Yang, L. R. Chen M. C. Wu, T. S. Lui, A. Kuo, and T. M. Lee*, “Effect of vacuum heat treatment of plasma-sprayed hydroxyapatite coatings on their in vitro and in vivo biological responses”, Journal of Medical and Biological Engineering. 29,296-303 (2009) [SCI].

30 C. S. Chang, T. M. Lee, J. K. Liu, C. H. Chang, “The effect of microrough surface treatment on miniscrews used as orthodontic anchors”, Clinical Oral Implant Research. 20,1178-1184 (2009) [SCI].

31 Y. C. Wu, T. M. Lee, K. H. Chiu, S. Y. Shaw, and C. Y. Yang, “A comparative study of the physical and mechanical properties of three natural corals based on the criteria for bone-tissue engineering scaffolds”, J. Mat. Sci.: Mat. in Med. 20, 1273-1280 (2009) [SCI]

32 C. C. Wang, Y. C. Hsu, F. C. Su, S. C. Lu, and T. M. Lee*, “Effects of Passivation Treatments on Titanium Alloy with Nano-metric Scale Roughness and Induced Changes in Fibroblast Initial Adhesion Evaluated by a Cytodetacher”, J. Biomed. Mater. Res. 88A, 370-387 (2009) [SCI]

 

 

 

瀏覽數:

登入

登入成功