張志涵

教授

Rice University        機械工程博士

醫學工程

骨科生物力學

牙科生物力學

有限元素分析

電腦輔助工程

姓名

張志涵

職稱

教授

辦公室

5729

聯絡電話

06-2757575 ext.63427

傳真

06-2343270

E-Mail

changbme@mail.ncku.edu.tw

實驗室

計算生物力學實驗室

學歷

Rice University  機械工程 美國     博士 

Rice University  機械工程 美國        碩士

國立中央大學  機械工程 中華民國 學士

經歷

國立成功大學      研究總中心 副主任

國立成功大學      醫學工程研究所  教授 

國立成功大學      醫學工程研究所  教授兼任所長     

國立成功大學      醫學工程研究所  副教授       

美國富士康國際公司    研究發展部 工程師

裕隆汽車公司      工程中心    工程師       

研究專長

醫學工程 骨科生物力學 牙科生物力學 有限元素分析

電腦輔助工程

近五年榮譽與獲獎 (2009-2013)

2010 獲選國立中央大學機械系『傑出系友』

2007 獲選國立成功大學『教學傑出教師』

台灣生物醫學工程學會理事

台灣生物力學學會理事

台灣口腔生物科技暨醫療器材產業發展促進協會理事

Journal of Medical and Biological Engineering (SCIE Journal) 編輯委員

南部科學園區高雄園區醫療器材專區技術審查委員

金屬工業發展中心光電與醫療器材處顧問

近五年著作與專利 (2009-2013)

期刊論文 (2004-2010)

1. Lin HY, Huang CH, Chang CH, Lin CH,  “Direct near-field optical imaging of plasmonic resonances in metal nanoparticle pairs”, OPTICS EXPRESS,18(1): 165-172, 2010(SCI)

2. Lin SW, Hsu JH, Chang CH, Lin CH, “Objective-type dark-field system applied to multi-wavelength capillary electrophoresis for fluorescent detection and analysis”, BIOSENSORS & BIOELECTRONICS, 25(2): 450-455, 2009 (SCI)

3. Chang CS, Lee TM, Chang CH, Liu JK, “The effect of microrough surface treatment on miniscrews used as orthodontic anchors”, CLINICAL ORAL IMPLANTS RESEARCH, 20(10): 1178-1184, 2009 (SCI)

4. Chuang SF, HP, Chang CH, Liu, JK, “Effect of fluoridated carbamide peroxide gels on enamel microtensile bond strength”, EUROPEAN JOURNAL OF ORAL SCIENCES, 117(4): 435-441, 2009 (SCI)

5. Lin CY, Chang NS, Chang CH, Chen SJ, “Surface plasmon-enhanced two-photon fluorescence microscopy for live cell membrane imaging”, OPTICS EXPRESS, 17(8): 5987-5997, 2009 (SCI)

6. Tsai PY, Chang CH, Yu CH, Chen YC, Chang FM, “Thanatophoric Dysplasia: Role of 3-Dimensional Sonography”, JOURNAL OF CLINICAL ULTRASOUND, 37(1): 31-34 2009 (SCI)

7. Chen HP, Chang CH, Liu JK, Chuang SF, Yang JY, “Effect of fluoride containing bleaching agents on enamel surface properties”, JOURNAL OF DENTISTRY, 36(9): 718-725 2008 (SCI)

8. Chuang SF, Chen TY, Chang CH, “Application of digital image correlation method to study dental composite shrinkage”, STRAIN, 44(3): 231-238 2008 (SCI)

9. Chen SH, Yu TC, Chang CH, Lu YC, “Biomechanical analysis of retrograde intramedullary nail fixation in distal femoral fractures”, THE KNEE, 15(5): 384-389 2008 (SCI)

10. Hsu JT, Tsai MT, Chang CH, Fuh LJ, Lai KA, Liu ZL, Tu MG, Huang HL, “Finite Element Analysis of the Effects of Sizes of Acetabular Components on the Initial Stability of the Acetabular Cup”, JOURNAL OF MEDICAL AND BIOLOGICAL ENGINEERING, 28(2): 59-63 2008 (SCIE)

11. Hsu JT, Chang CH, Huang HL, Zobitz ME, Chen WP, Lai KA, An KN, "The number of screws, bone quality, coefficient affect acetabular cup and friction stability", MEDICAL ENGINEERING & PHYSICS 29(10): 1089-1095 2007 (SCI)

12. Huang HL, Chang CH, Hsu JT, Fallgatter AM, Ko CC, “Comparison of implant body designs and threaded designs of dental implants: A 3-dimensional finite element analysis”, INTERNATIONAL JOURNAL OF ORAL & MAXILLOFACIAL IMPLANTS 22 (4): 551-562 2007 (SCI)

13. Hsu JT, Chang CH, An KN, Zobitz ME, Phimolsarnti R, Hugate RR, Lai KA, “Effects of screw eccentricity on the initial stability of the acetabular cup”, INTERNATIONAL ORTHOPAEDICS 31 (4): 451-455 AUG 2007 (SCI)

14. Hsu JT, Chang CH, Huang HL, An KN, Chen WP, Liu ZL, Lai KA, “Effects of Screw Fixation on the Acetabular Cup”, JOURNAL OF MEDICAL AND BIOLOGICAL ENGINEERING 26(3): 143-148 2006 (EI)

15. Hsu JT, Lai KA, Chen QS, Zobitz ME, Huang HL, An KN, Chang CH*, “The realtion between micromotion and screw fixation in acetabular cup”, COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE 84 (1): 34-41 OCT 2006 (SCI)

16. Huang HL, Lin CL, Ko CC, Chang CH*, Hsu JT, Huang JS, “Stress analysis of implant-supported partial prostheses in anisotropic mandibular bone: in-line versus offset placements of implants”, JOURNAL OF ORAL REHABILITATION 33 (7): 501-508, 2006 (SCI)

17. Chuang SF, Chang CH, Yaman P, Chang LT, “Influence of enamel wetness on resin composite restorations using various dentine bonding agents: Part I - effects on marginal quality and enamel microcrack formation”, JOURNAL OF DENTISTRY 34 (5): 343-351, 2006 (SCI)

18. Chuang SF, Chang LT, Chang CH, Yaman P, Liu JK, “Influence of enamel wetness on composite restorations using various dentine bonding agents: Part II - effects on shear bond strength”, JOURNAL OF DENTISTRY 34 (5): 352-361 2006 (SCI)

19. Chang JZC, Chen YJ, Chang FHF, Yao JCC, Liu PH, Chang CH, Lan WH, “Morphometric analysis of mandibular growth in skeletal class III malocclusion”, JOURNAL OF THE FORMOSAN MEDICAL ASSOCIATION 105 (4): 318-328 2006 (SCI)

20. Chang JZC, Liu PH, Chen YJ, Yao JCC, Chang HP, Chang CH, Chang FHF, “Thin-plate spline analysis of the effects of face mask treatment in children with maxillary retrognathism”, JOURNAL OF THE FORMOSAN MEDICAL ASSOCIATION 105 (2): 147-154 2006 (SCI)

21. Lee MY, Chang GL, Chang JH, Hung YC, Chang CH, Lee EJ, “Biomechanical evaluation of cervical spine fixation after healing in a destabilized cervical spine model in sheep: A comparison of the anterior plating and posterior wiring techniques”, JOURNAL OF TRAUMA-INJURY INFECTION AND CRITICAL CARE 60 (6): 1307-1314 2006 (SCI)

22. Chang HP, Liu PH, Yang YH, Lin HC, Chang CH, “Craniofacial morphometric analysis of mandibular prognathism”, JOURNAL OF ORAL REHABILITATION 33 (3): 183-193 2006 (SCI)

23. Chang CH, Liao JD, Chen JJJ, “Cell adhesion and related phenomena on the surface-modified Au-deposited nerve microelectrode examined by total impedance measurement and cell dtachment tests”, NANOTECHNOLOGY 17 (10): 2449-2457 2006 (SCI)

24. H.L. Huang, J.S. Huang, C.C. Ko, J.T. Hsu, C.H. Chang*, M. Chen, “Effects of splinted prosthesis supported a wide implant or two implants: a three-dimensional finite element analysis”, Clinical Oral Implants Research, 16 (4): 466-472 AUG 2005 (SCI)

25. Chang HP, Lin HC, Liu PH, Chang CH, “Midfacial and mandibular morphometry of children with Class II and Class III malocclusions”, JOURNAL OF ORAL REHABILITATION 32 (9): 642-647 2005 (SCI)

26. Chang HP, Lin HC, Liu PH, Chang CH, “Geometric morphometric assessment of treatment effects of maxillary protraction combined with chin cup appliance on the maxillofacial complex”, JOURNAL OF ORAL REHABILITATION 32 (10): 720-728 2005 (SCI)

27. H.P. Chang, M.C. Chuang, Y.H. Yang, P.H. Liu, C.H. Chang, C.F. Cheng, J.P. Lai, “Maxillofacial growth in children with unilateral cleft lip and palate following secondary alveolar bone grafting: An interim evaluation”, Plastic and Reconstructive Surgery, 115(3): 687-695, 2005 (SCI)

28. C.H. Chang, C.L. Fang, J.T. Hsu, C.P. Chen, S.F. Chuang, “Cavity dimension effect on MOD dental restoration filled with resin composite - A finite element interface stress evaluation”, Journal of Medical and Biological Engineering, 24(4): 195-200 2004 (EI)

29. P.H. Liu, C.H. Chang, H.P. Chang, and, H.F. Chang, “Treatment effects of chin cup appliance on mandible in Class III malocclusion: Strain tensor analysis. A pilot study”, Quintessence International, 35 (8): 621-629, 2004 (SCI)

30. T.S. Lin, C.L. Lin, C.H. Wang, C.H. Chang*, and Y.S. Chang, “The effect of retainer thickness on posterior resin-banded prostheses: a finite element study”, Journal of Oral Rehabilitation, 31(11): 1123-1129, 2004 (SCI)

31. S.F. Chuang, Y.T. Jin, J.K. Liu, C.H. Chang, D.B. Shieh, “Influence of flowable composite lining thickness on class II composite restorations”, Operative Dentistry, 29(3): 301-308, 2004 (SCI)

32. C.C. Lin, C.H. Chang*,, C.L. Wu, K.C. Chung, and I.C. Liao, “Effects of liner stiffness for trans-tibial prosthesis: a finite element contact model”, Medical Engineering and Physics, 26(1): 1-9, 2004 (SCI)